GimbalGuru.com
360 Camera Reviews 360 Cameras FAQs and Wikis

GoPro Fusion review, tutorial, comparison, samples (updated March 29, 2018)

GoPro Fusion long term review with tutorial
GoPro Fusion long term review with tutorial

Here’s a hands-on comprehensive look at the GoPro Fusion ($699.99), the first all-in-one 360 camera from GoPro.  I’ve been shooting with the Fusion since it launched and here is my hands-on review.   I also show several ways to use the GoPro Fusion to revolutionize your videos.   I also discuss its advantages and disadvantages. What’s new: should you export at 6K for YouTube.

GoPro Fusion review and comparison
GoPro Fusion review and comparison

Contents:
NEW! Video review: long-term review, tutorial, guide, and comparison with other 360 cameras.
Background and history
Specifications
Features
– January 2018 updates
– More information about OverCapture and how it differs from Virb 360’s HyperFrame and Insta360 ONE’s FreeCapture
– How to shoot with the GoPro Fusion
Post-shooting workflow tutorial.
—- Hardware requirements, render times, best practices
—- Comparison between 5K vs. 4K
—- Comparison between 6K vs 5K
Photo and video image quality comparison
Stabilization
More sample photos 
More sample videos
Conclusion
– The lowest cost protection plan with no deductibles
User manual
Download sample files here (stitched and unstitched)

Updated: March 1, 2018: added comprehensive video review
Updated: February 19, 2018 – comparison between 5.2K and 4K
Updated: February 2, 2018 – low cost protection plan available from Amazon
Updated: January 19, 2018 – review, more sample photos and videos, Fusion Studio v 1.1 update.
Updated: November 29, 2017 – more sample photos, comments about workflow and stabilization.
Updated: November 22, 2017
Updated: November 17, 2017
Originally posted: September 28, 2017



Here is a video of my new long-term review of the GoPro Fusion:

TABLE of CONTENTS
01:12 Part 1 – 10 game changers vs Hero 6 and other GoPros and action cameras
04:52 Part 2 – How to shoot with the Fusion
05:36 How to use overcapture
06:44 7 Shooting techniques
07:52 Part 3 – Is it worth it?
08:54 Photo advantages and disadvantages
09:30 Raw vs JPEG comparison, how to stitch
10:18 Video advantages and disadvantages
10:37 GoPro Fusion vs. Insta360 Pro
12:15 Usability advantages and disadvantages
13:27 GoPro Fusion evaluation
14:06 Comparison with other 360 cameras
14:16 Photo: Xiaomi Mijia Mi Sphere
14:38 Photo: Insta360 One
15:00 Video: Yi 360 VR
15:26 Video: Insta360 One
15:56 Video: Xiaomi Mijia Mi Sphere
16:08 Video: Ricoh Theta V
16:25 Video: Rylo
16:45 Video: Garmin Virb 360
17:02 Conclusion and summary

BACKGROUND AND HISTORY

Ever since 360 cameras became popular starting around 2015, enthusiasts had been expecting a 360 camera from GoPro.  GoPro first released two rigs, the GoPro Odyssey, a Google Jump 8K 3D 360 camera rig consisting of 17 cameras, and the GoPro Omni, a 6-camera rig that captures 8K video in 2D.  GoPro also acquired Kolor, developers of Autopano stitching software.

Finally, in April 2017, GoPro announced the Fusion, their first all-in-one 360 camera which featured 5.2K video and the ability to frame a 360 video as a flat non-360 video, a feature which GoPro called “Overcapture.”

The Fusion was originally scheduled for release in 2018.  However, on September 28, GoPro announced that the Fusion would begin shipping November 30, 2017 for $699.  That date was later moved to November 24, 2017 in the US, and in fact began to ship sometime November 13, 2017.

Here is a video giving an overview of the Fusion’s key features, and how it complements GoPro’s line of cameras:

If you want to see the launch announcement, you can see it here.

Unlike other 360 camera companies, GoPro placed heavy emphasis on using the Fusion to take flat / cropped non-360 videos.  The launch explained to GoPro shooters how they could could use a GoPro Fusion to capture their adventures in ways that would not be possible for a conventional GoPro camera.  I commend GoPro for coming up with memorable names for 360 video techniques.  “Angel view” definitely sounds catchier than “invisible flying camera.” 🙂

Here are the full specifications:

GOPRO FUSION SPECIFICATIONS:

Here are the Fusion’s specifications:

Aperture:f/2.0 (unconfirmed)
Video resolution:4992 x 2496 @ 30fps
3008 x 1504 @ 60fps
Photo resolution:5760 x 2880.
Can take photos in burst mode (up to 30fps). Can take photos in Raw format (The GoPro gpr format, based on the DNG format). Does not necessarily mean stitched in Raw.
ISO (photos):100 to 800
ISO (videos):100 to 6400
Shutter speed:up to 30 seconds. Long enough for light painting and night sky photos.
Storage:two removable Micro SD cards
Connection:USB Type C
Dimensions (approx):L: 73mm
H: 75mm (without Gopro mount), 90mm (with GoPro mount)
W: 23mm (excluding lenses)
39mm
(with lenses)
Price:$699.99
Release date:November 24, 2017 (however, it began shipping sometime November 13, 2017).

You may have noticed that the video resolution is 4992 x 2496, yet GoPro describes the resolution as 5.2K.  This is because they are using 960p per “k”.  For example, 3840 x 1920 is widely accepted as 4K.  GoPro is arguing that if 3840 x 1920 is 4K, then 4992 x 2496 is 5.2K.  With this logic, the Garmin Virb 360 and Yi 360 VR would be considered as 6K (5760 x 2880) instead of 5.7K.   Nonetheless, what ultimately matters is not the nominal resolution but the actual image quality.

GoPro Fusion
GoPro Fusion

GOPRO FUSION FEATURES

Here are GoPro Fusion’s features:

Image stabilization: GoPro has confirmed that Fusion has gyro-based stabilization.  Stabilization is very important for 360 videos because it ensures that a viewer can look around the video smoothly.  Stabilization also makes it possible to hold the camera at any angle.

OverCapture – This is one of the most important features of the GoPro Fusion. It lets you use the 360 video to create a traditional 16:9 video in 1080p resolution, with full control of the perspective.  First, you shoot a 360 video.  After the video is recorded, you download the video to your Fusion phone app.  From there, you frame the video by moving the phone around, as if you had been shooting the video with your phone. The end result is a 16:9 full HD video that looks like it was shot by a professional cameraman.

OverCapture therefore appears to work more similarly to Insta360 ONE’s FreeCapture, as opposed to the Virb 360’s simpler HyperFrame or Insta360 Studio, which shoot virtual camera perspectives through sliders that you control with the mouse.  The practical difference is that with OverCapture (and FreeCapture), virtual camera movements appear more natural instead of robotic.

Between OverCapture and FreeCapture, there seem to be a few differences.  First, with OverCapture it appears you can tilt the virtual camera whereas with FreeCapture (as of version 1.0.7 of its app), the virtual camera is always level.

OverCapture tilted angle
OverCapture tilted angle

On one hand, tilting the camera gives you more creative freedom.  On the other hand, a camera that remains level will have a video that looks more stable.  Then again, the sample video shown by GoPro looks pretty stable.

Another difference is that with FreeCapture, you can zoom the camera smoothly from telephoto all the way to tiny planet and anything in between.  In the GoPro OverCapture demo video, I did not see any zooming, although this OverCapture video, posted months before, does show zooming:

But this demo video showed panning movements that were too smooth and seem to have been generated from a desktop-based slider interface and not a handheld smartphone interface.

OverCapture was made available on iOS in January 2018. As of February 28, 2018, there is no overcapture feature yet for Android.

Spatial audio:  Fusion has 3 microphones on top plus one more microphone not shown in the diagram (4 total) and can capture 360 spatial audio. Spatial audio means that when a 360 video is rotated, then the sound will also change to match the direction in which the video is rotated, left, right, up, or down. By comparison, stereo or even 5.1 surround sound will not change no matter how the 360 video is rotated.

GoPro Fusion has 4 microphones
GoPro Fusion has 4 microphones to give it surround audio

 

Protune mode: when ProTune is activated, the user can specify the auto ISO limit, and the exposure compensation.  You can also shoot in raw mode (GPR format).

Waterproof up to 16 feet without a housing like a Hero5 Black.  However, just because a camera is waterproof doesn’t mean it can take good underwater photos or videos.  UPDATE: GoPro has confirmed that the Fusion underwater stitching will not be smooth.  I don’t know yet if they will produce a separate waterproof housing to enable smooth stitching underwater.

Voice control.  This feature is similar to GoPro Hero5 Black and Hero5 Session.  Voice control is a useful feature for an action camera such as the Fusion because it allows hands-free operation of the Fusion when you might otherwise be occupied

GPS location tagging.  This feature is useful mapping, among other things.  However, the user manual did not mention Google Street View.  Nonetheless I suspect the photos will be compatible with StreetView.

Quikcapture: When Fusion is in standby, you can quickly capture a spontaneous moment by pressing the shutter button.  This will automatically wake up the camera and begin recording.  Alternatively, you can hold down the shutter button from standby to use Quikcapture with a time lapse photo.

Video highlights: You can bookmark highlights in your videos that will later make it easier to edit the video.  Highlights can be marked either by pressing a button on the Fusion, or with a voice command, either “GoPro Highlight” or “That was sick” (:D).

In addition to a time lapse video mode, Fusion has an intervalometer (time lapse photo mode). The intervals can be as short as 0.5 second to as long as 60 seconds.  There is also a separate night lapse photo mode that can take sequential photos with long exposures.  This can help create photos of star trails.

Remo waterproof voice activated remote: Fusion is compatible with the Remo waterproof voice activated remote for the Hero5 Black (see below under “How to shoot with GoPro Fusion”).

Can record while charging.  The side door can be removed to make it easier to connect a USB cable while recording.

NEW! Remote activation.  You can remotely turn on the GoPro Fusion.  Make sure your phone’s Wi-Fi and Bluetooth are on.  Launch the app and tap on the Fusion.  The app will be able to remotely turn on the Fusion.  You can also remotely put the Fusion on standby.

NEW! Find my camera.  If you misplaced your Fusion, the app can help you find it.  When the app is connected to the camera, there is an option in the settings to “locate my camera.”  This will cause the camera to beep until you turn off the option.  Hopefully the beeping will help you find it.

It has TWO micro SD cards, one for each lens.  Incredibly, you can nonetheless get a fully stitched live preview (see below under “How to shoot with GoPro Fusion”).

January 2018 update

GoPro Fusion January 2018 update
GoPro Fusion January 2018 update

In January, GoPro released a major update to the Fusion desktop and mobile apps just in time for CES.
– Stabilization performance has improved tremendously. It appears that you can apply the new stabilization to previous clips. Another benefit is that it appears stabilization drifting has been fixed.  See a sample video under stabilization below.
– There are now two stabilization modes. One mode will lock to a fixed compass direction, and the other, called “anti-shake” will stabilize while maintaining the camera orientation. For example, if the camera is inside a car facing the driver, and the car turns left, then in full stabilization mode, the camera’s ‘front’ view will now be the passenger side. But in anti-shake mode, the camera’s front view will still face the driver.
– The image quality for the GoPro color mode has improved.  Whereas before, “flat” sometimes looked better for me, now I consistently prefer the GoPro look.  See sample photos below. In my experiments, it appears that using Flat view does NOT increase the dynamic range.
– Importing media directly from Fusion now works correctly.  Previously, when I connect the camera to my desktop, the app usually could not find the media.  Now, it is consistently able to find media. However, because the Fusion uses USB 2.0, I find it much faster to copy the contents of the Micro SD card onto my hard drive using a USB 3.0 card reader.

The mobile app has improved as well.  Most importantly, they added the overcapture feature to the iOS version.  And the Android version of the GoPro app is now able to connect to Fusion (assuming your phone is designated as ‘compatible’) but there is no overcapture mode, nor is it possible to share a 360 photo or video from the app.  I am assuming that GoPro will be able to fix these issues.

How to shoot with the GoPro Fusion

In general, shooting with the Fusion is pretty straightforward, and is identical to the way Hero 5 Black or Hero 6 Black works, except that there is no touchscreen.

Shooting without a remote:
The camera has only two buttons: a power button / menu button and a shutter button. In menus, the menu button is used to move from one option to another, while the shutter button is used as the OK button.

There are a few ways for shooting without a remote:
1. You can switch to the photo mode or video mode or intervalometer (time lapse) and press the shutter; or
2. Use voice control and say “GoPro take a photo,” or “GoPro start recording;” or
3. If the camera is sleeping, you can use Quikcapture.  With the camera off, press the shutter to record a video or hold down the shutter button, to begin interval shooting.  After you stop the video or the interval shooting, the Fusion will go back to sleep / standby.

Shooting with Remo voice-activated remote or Smart Remote:
Fusion can be controlled by Remo or Smart Remote.  Remo is both a shutter and voice activated remote. It does not have a button for changing modes, but you can use voice command to take a photo or video.  Smart Remote is a remote with a display and offers the same controls as the Fusion itself.  Smart Remote has a range of up to 180 meters (600 feet) and can control up to 50 cameras simultaneously.  However, unlike Remo, it does not have voice control.  Both remote shutters are waterproof to 10 meters.  For sports, I prefer to use the Remo.  For more controlled environments, I prefer to use Smart Remote.

Shooting with a phone:
As of January 18 2018, GoPro Fusion is compatible with both iPhone and Android. However, the Android version cannot share photos or videos to social media, as of February 2018.  The Fusion’s app is the same GoPro Capture app for GoPro Hero.
After installing the GoPro app and adding the Fusion as a new camera, the GoPro app can control the Fusion reliably.  Surprisingly, there is a fully stitched live view, although swiping the screen causes the preview to move in unexpected directions. Using the gyro to control the screen (by moving the phone) has much more predictable movement.

Exposure controls: if you want to control the exposure, you tap on the settings (wrench icon), and in the next screen, activate Protune.  This allows you to specify the exposure compensation and the ISO limit.  For video, the ISO limit is 6400.  For photo the limit is 800.  However, it seems you cannot control the shutter speed in normal photo mode.  In Night Photo or Time Lapse mode, you can select the shutter speed from Auto (up to 2 seconds), 2, 5, 10, 20, or 30 seconds.  There is no self-timer.

After taking a photo or video, you can go to the gallery to see a thumbnail.  However, on my iPhone 6, I could not download the photos or videos. On my iPhone SE or Samsung S8+, I’m able to view and download photos or videos. However, I could not export them in equirectangular format to my phone’s gallery.

POST-SHOOTING WORKFLOW

PHONE APP

Some smartphones can stitch photos and videos from the Fusion using the GoPro app.  An iPhone 6 can’t stitch but an iPhone 5 SE can stitch, up to 4K resolution in .mp4 format (with simplified template-based stitching).  There are simple controls such as for trimming the video, and sharing the video to Facebook or YouTube.  I was surprised that the video didn’t take very long to stitch, yet the stitching quality was somewhat decent, and the stitched video was stabilized.

On the other hand, the app would very often fail to connect to the camera’s gallery (I could use the app to control the camera but when viewing the camera’s contents, the app couldn’t show the gallery.)

In the January update to the app, GoPro added overcapture to the iPhone version which allows you to extract a static (non-360) full HD video from the 360 video while you choose the angles and perspectives.  (As of February 19, the Android version doesn’t have overcapture yet.) On an iPhone SE, overcapture does not work smoothly and there are many dropped frames, or the video can freeze while the audio continues playing.

One limitation seems to be that I can’t do a ‘cut’ and I can only pan (by contrast, the Insta360 ONE’s FreeCapture allows not just pans but also cuts).  Another limitation is that the app can sometimes crash (I tested with iPhone 7).  According to one beta tester, a future version of the Overcapture will allow cuts.

DESKTOP

Fusion Studio is GoPro’s desktop software for stitching Fusion photos and videos.  Fusion Studio is available for download here, for Windows or Mac (scroll down — thanks to Matt Smitherz and Meng Fye for bringing it to my attention) but you can’t use it without a Fusion camera connected to your PC.

There are two ways to import photos and videos to Fusion Studio: you can connect the Fusion to your PC or Mac, launch Fusion Studio, and click on “Browse Camera Media.”  The photos and videos from the camera will be imported into your preferred folder (under Edit… Preferences).  As of January 2018, this method of importing media now works reliably.

The second way to import media is to copy the files from both Micro SD cards into the import folder.  Each file has a prefix for GPFR (front camera) or GPBK (back camera) and a number suffix.  Photos or videos from the same shot will have the same number suffix.  As long as you don’t change the file names and as long as they are all in the same directory, Fusion Studio will be able to match the files automatically.

After the media are imported, using the app is pretty easy.  Here is the desktop tutorial segment of my video:

Some quirks with the Fusion’s workflow:

1. You’ll have a few choices for output: H.264, Cineform or Prores.  H.264 is the most widely supported, and takes up the least space, but is limited to 4K.  If you want 5.2K, you’ll need to use Cineform or Prores.  Cineform is supported in Adobe Premiere and even YouTube, but not in consumer video editors such as Cyberlink PowerDirector or Magix Movie Edit Pro, and not in Facebook (as of November 2017).  Another issue with Cineform is the huge size.  A 23-second video will take up 1.6GB of space and takes my low-end VR-ready PC about 4 minutes to stitch. Cineform format is more than ten times larger than the same video rendered in H.264.

2. The Fusion’s vertical correction is a little bit inconsistent, especially in the anti-shake stabilization mode (instead of the full stabilization mode).  Sometimes, you have to manually level the horizon for each photo and video as part of your work flow (fortunately Fusion Studio does have a built-in tool for this).  This makes it harder to batch-process several videos.

3. One idiosyncrasy of the Fusion is that the settings for adjusting the image are somewhat unpredictable.  For example, Fusion Studio doesn’t have a simple exposure or brightness slider.  Instead it has “shadows and highlights,” which seems to be somewhat of a mix of highlight recovery and shadow recovery.   In terms of the color and tone curve profile, you can choose between Flat and GoPro.  In January 2018, GoPro fixed the Fusion Studio software so that the GoPro setting produces a consistently more saturated image with normal contrast levels. I also found that there is no difference in dynamic range between the “Flat” look and the “GoPro” look. At the same time, I found the GoPro setting to work for any shot, in any kind of lighting. White balance is also very accurate. Usually I don’t have to change temperature or tint, and I just tweak the “highlights and shadows” slider.

Hardware requirements, render times, and best practices

One issue with the Fusion is that it may take a while to render, depending on your computer hardware.
Here’s the bottom line: if you have a dedicated graphics card, rendering time is ok. If not, then it will probably take a while.

To give you an idea, on my i7-6900, 32GB, GTX 1080, rendering 5.2K 360 (not overcapture) in Cineform format with D-Warp “ON,” rendering a 1-min video took 7 minutes. On my i5-4590, 8GB, GTX 1050 Ti, it would probably take maybe 8 or 9 mins to render (i’m guessing). If your PC has more modest specs, you can render as 4K and the image quality will almost be the same, but it will be much faster to process. The same 1 min video, on the same hardware took me 4 mins 11 secs when rendered as 4K H.264.

Here is a table compiled by Dean Zwikel with render times for various configurations of PC and Mac.

Other suggestions:
– Copy the files to your hard drive and use “Add Media.” This will allow it to generate previews faster and stitch more quickly.
– To generate previews more quickly, put your files into smaller directories. Fewer files / shorter videos will allow previews to be generated faster. (Note also that Fusion will search for files in subdirectories, so if you select a folder with few files but has subdirectories with many files, there’s no benefit in terms of speed of loading previews.)
– If you have a slower PC, trim your video to decrease the amount of video that needs to be stitched. Also, be selective about which videos to render.

GoPro Fusion Comparison 5.2K vs 4K

Given the additional requirements for 5K (limited to Cineform or Prores, more demanding hardware), you may want to consider using 4K instead.  I did a comparison between 4K and 5.2K to see the difference between them.  I rendered a video clip in 5.2K and in 4K, both in Cineform, and then viewed them with GoPro VR 3.0 in 360 mode.  Here is a comparison of 100% crops from the 5.2K and 4K samples.    Can you tell which one is 5.2K and which one is 4K?

GoPro Fusion 5.2k vs 4k comparison
GoPro Fusion 5.2k vs 4k comparison

The answer is that Sample A is 5.2K, while Sample B is at 4K.   You might say that the 5.2K sample has very slightly better definition.  The difference between them is extremely subtle.  When both are uploaded to YouTube, they are even harder to distinguish:

4K sample:

5.2K sample:

If you want to compare both samples side by side, you can do that with the Ultimate 360 Camera Comparison Tool. You can find both samples at the bottom of the playlist.

What I think this experiment shows is that the Fusion workflow isn’t necessarily difficult.  Rendering as 4K is a feasible option and yields image quality that is nearly identical to the 5.2K version.

Should you export GoPro Fusion videos at 6K for YouTube?

One issue with Fusion’s resolution is that it doesn’t fit YouTube’s standard resolutions.  If you upload a 5.2K video to YouTube, YouTube will automatically resize it as 4K.  One workaround is to use Premiere or other software to resize the Fusion video as 6K (5760 x 2880) so that Youtube will accept it at the higher resolution rather than rounding it down to 4K.  But does doing this improve the video quality for YouTube?  I tried it out and I found that the answer is NO.

I compared two videos: the first video was 4992 x 2496 in Cineform, uploaded directtly to YouTube.  YouTube rounded it down to 4K.  The second video was the same exact video, except that I imported it into Premiere, exported it as 5760 x 2880 in H.265 format and uploaded it to YouTube.  Youtube accepted the video as 5K (that’s what youtube calls videos at 5760 x 2880) instead of rounding it down to 4K.

I compared 100% crops from the two videos side by side using the 360 Camera Comparison Tool.  I found that there was no noticeable improvement in quality for the 6K video.  If anything, the 6K video was at a disadvantage because there was a slight seamline, which sometimes happens when you resize videos.

GoPro Fusion on Youtube: 4K on left, 5K on right
GoPro Fusion on Youtube: 4K on left, 5K on right

You can try this experiment yourself to compare the two samples using the comparison tool. To conclude, there is no advantage in exporting a Fusion video as a 6K video, at least on YouTube. I haven’t tried doing the same experiment on other platforms such as Vimeo.

 

GoPro Fusion photo and video image quality comparison

I compared the GoPro Fusion’s photo and video image quality against nine other cameras:
Garmin Virb 360
Insta360 ONE
Kodak PIXPRO Orbit360
Nikon Keymission 360
Ricoh Theta V
Samsung Gear 360 2016 (original version)
Samsung Gear 360 2017
Xiaomi Mijia Mi Sphere
Yi 360 VR

    Video comparison:

    Photo comparison:

My observations so far:
– Stitching is generally excellent, although sometimes the stitch line is visible in videos in areas close to the camera.  It is definitely not always as seamless as the demo video first shown by GoPro.
– Sharpness and detail is excellent but seems to drop slightly toward the stitch line.
– There is a little bit of purple fringing near the stitch line (more noticeable if you use the GoPro color mode).
– Highlight range is excellent, among the best I’ve seen for consumer 360 cameras.
– The shadow areas seem to have low bit depth, and there is a loss of detail in darker areas, especially when using the GoPro color profile (as opposed to the flat color profile).  This is also the case for shots in low light taken at a high ISO.  To mitigate this, you can use ProTune to limit the maximum ISO in either photo or video mode.
– Excellent flare resistance, possibly the best I’ve seen. I plan to do more tests.
– White balance is excellent and usually accurate. I seldom find a need to adjust the color temperature or tint too much, except in indoor artificial lighting.

After shooting with the Fusion in various lighting conditions, I have found that the Fusion excels in showing high contrast lighting conditions where you want to ensure that there is detail in both highlight and shadow areas, notwithstanding the loss of some detail in deep shadows. There were several high-contrast scenes I shot where I was pretty sure the detail would be lost in the shadows or highlights, only to find out that the Fusion was able to cope with the difficult lighting conditions.  To me this is the most impressive and defining characteristic of the Fusion, even more than its excellent stabilization or its smooth stitching.

Stabilization

One of the key features touted for the GoPro Fusion is its stabilization. Stabilization is an important feature for 360 cameras because it keeps the horizon level and avoids discomfort for viewers. Moreover, stabilization can enable the shooter to use the Fusion at any angle, and when used with a sufficiently slim monopod, the camera can appear to be an invisible flying camera, an effect which I first demonstrated back in May 2017 with the Xiaomi Mi Sphere, and which GoPro has called “angel view.”

When the GoPro was first released, there were issues with stabilization (video sometimes looked unstabilized, or the video would drift).  In the January 2018 update, the stabilization improved tremendously.  Here is a sample.  It is admittedly not a particularly challenging stabilization test, but you can see that the video looks level and more importantly, there is no noticeable blur.  On most of my videos, there is no drifting, but on a few videos, there is a little bit of drifting (on the x-axis, i.e., pitch).

Here is a video from a Fusion attached to a dog, shot by Dan Jesse.  The video looks surprisingly watchable despite the bouncing of the camera.  On the other hand, there’s a similar Rylo demo video where the video looks noticeably more stable.

Sample Photos

Here is a virtual tour with sample photos from GoPro Fusion.  All photos were not unedited.

For other sample photos, see here:

11/29/17 update:   GoPro Fusion has ProTune settings (which can be used to customize the settings).  I’ve used ProTune to limit the auto ISO to 100 and the photos look pretty good. I’m testing to see how photos perform with auto ISO at 400 or 200. However, I do not recommend leaving it at 800, nor do I recommend turning off ProTune because at high ISOs, the bit depth drops noticeably, especially in the shadows.

Here is another sample 360 photo with long exposure by Sascha Endlicher, M.A..

Here are my observations:
– The stitching is perfect! This looks as good as the stitching of the Theta S, and looks better than the stitching of the Theta V. It looks seamless even at close distances.
– Sharpness is about as good as can be expected for a 360 camera of this resolution. The sharpness is pretty consistent throughout the frame, although there is a very slight drop at the stitch line.
– In this long exposure sample, the noise seems quite low.
– Very good flare resistance. It’s not immune from flare, but the flare artifacts aren’t objectionable, and there is not a lot of reduction of contrast.
– There is some green fringing in high contrast areas.
– There is some posterization noticeable in the sky.

 

GoPro Fusion Sample Videos

Here is a playlist of GoPro Fusion sample videos (click on the upper left corner to select a video):

Conclusion

The Fusion has excellent image quality for photo and video.  Optics are close to perfect, with consistent sharpness throughout the frame.  The detail is very good, and when a 360 video is cropped as a full HD video, the video looks somewhat similar to a native 1080p video from a consumer camera.   I compared the Fusion to the $3500 Insta360 Pro, and at normal viewing distances, the Fusion looked close to the Insta360 Pro in level of detail (see my video review).

What’s most impressive about it is the dynamic range, which can capture both highlights and shadows even in high contrast lighting conditions.  With the January 2018 update, stabilization has improved markedly.  While the stabilization might not outperform some cameras such as the Rylo (or the Insta360 ONE with the upcoming update), the stabilization is easily one of the best among 360 cameras of the same generation.

The Fusion’s weakest area at the moment is the workflow.  First of all, when you import videos and photos, it generates preview files but doesn’t save them.  This means every time you start the app and look at a directory, it has to regenerate the preview files.  Second, you have to manually level each photo or video.  This makes it harder to batch process files.  Third, when you work on files and make changes to its settings, those settings are only kept for that session and disappear when you close the app.  This means you must finish the job and stitch it.  You can’t edit half way and close the app to continue another time.  Fourth, at 5.2K, files can only be saved in Cineform or Prores (there is no export for H.265, and H.264 export is limited to 4K).  On the positive side, rendering times are reasonable (comparable to Virb 360 and much faster than Yi 360 VR).  My workaround is to simply to stitch as 4K for casual shooting, and it still looks very detailed.

Android compatibility is also spotty.  As of GoPro app 4.2, the app crashes on my Samsung S8+ when viewing photos or videos.  The silver lining is that the Fusion is usable even without the smartphone app because its in-camera menu gives access to all available settings, as does the optional Smart Remote accessory.

Finally, another weakness is that it is not rugged. Its lens is not replaceable, nor is there an external housing accessory for it. This is why I strongly recommend getting a protection plan (see below).

WHERE TO BUY; PROTECTION PLAN

GoPro Fusion is now available on Amazon, and that’s the best place to buy it for three reasons. First, when you buy the Fusion from Amazon, you can get a 4-year accident protection plan for around $57 (covers drops, spills, and product malfunctions), with “no deductibles or hidden fees“:

Accident protection
Accident protection

Normally, I never buy those warranties.  But 360 cameras are not like other electronics or cameras or lenses — if you scratch the lens, the scratch will definitely affect the image quality because of the extremely short focal length.  And the Fusion lens is not user-replaceable (unlike the Virb), and there’s no external housing yet for now.  At the same time, if you buy the Fusion from GoPro, their GoPro Plus protection plan is $5 per month ($60 per year) AND there is a deductible (the deductible is $129 for GoPro Care and $139 for GoPro Plus).  The Amazon protection plan is a no-brainer.   Second, when possible, I buy from Amazon because of their customer service and very pro-consumer return policy.  Third, if you live outside the US, GoPro doesn’t ship outside the US yet but Amazon does. Thank you very much for using this affiliate link to support 360 Rumors at no additional cost to you so I can do more tests and reviews!  In the meantime, I will keep updating this page with more info on the Fusion, so please bookmark it and please share it with interested friends (there’s a sharing button on the upper left corner).

About the author

Mic Ty

36 Comments

Click here to post a comment

  • Assuming even some of your assumptions are true, GoPro will have a big dud on its hands. In March 2018 the next best thing will already be out and the Fusion will be a 360 electronic footnote. I’m been a GoPro user for several years but they are really falling behind.

  • No…not Mr Negative today..;) wondering what Fusion can do that not Garmin Virb can do? Seams equal to me with only a few differencies (for example $200…)? Wonder what extra features the Garmin Virb 2 will have that the Fusion 1 do not have in march 18… Both the Fusion and the Garmin seems to be very good cams with high quality videos and more. Only overpriced IMO. I still put my vote for the Yi 360 cam…will be exciting when we know what features it really has…and not only rumors.

  • Wow, I’m really wishing there was an updated Nikon keymission version II on the horizon, or even better, a Sony 360 camera with their own wonderful 1″ sensors for $1K. It looks like renting an Insta360 Pro is a good option for anyone that needs an all in one photo/video/live solution with prosumer quality but can’t justify $3500 to own one (non-profits/schools and colleges). Otherwise, the low-cost Insta360 One is very tempting for web and social media use.

    • Hi Jeff. A 360 camera with a 1-inch sensor would have great image quality but would probably be quite expensive not only because of the sensors, but also because most fisheye lenses are either for smartphone-size sensors or larger sensors such as for full frame, aps-c, or m4/3 cameras.

      For web and social media, yes an Insta360 ONE would be great. I love it.

      Best regards,
      Mic

  • Official announcement has decent price and availability. Maybe put some downward price pressure on the Virb 360.

    Questions:
    In camera stitching? For both 4k and 5.2? And photos?
    When will the GoPro desktop Fusion Studio software be available? What will it do?
    Will current GoPro wireless remotes work with it?
    Like to see some photo samples.

    Sounds like the OverCapture app won’t launch until early 2018.

  • Mic, I do Action sports and, it worries me if:
    1. the lenses on the Fusion Will be replaceable or not?
    2. or if it will be a dive case to use to protect the lenses from scratches.
    3. Will it come with the overCapture available?
    4. in camera stich?
    5. phone stitch and then share from phone?
    6. need PC software to stitch an the share?
    7. Overcapture on Phone app or PC software?

    please need help with those questions.

    • Hi Galileo.
      1. No I don’t think so. But they have an extended care plan for around $150. If it gets damaged they will replace.
      2. No they didn’t say anything about a waterproof case. See above re extended care.
      3. edited: Overcapture will be available “early 2018”
      4. No. stitching via app or desktop.
      5. Stitch via phone yes, share from phone probably
      6. No need to use PC but yes PC stitching is possible
      7. edited: Overcapture is via smartphone app. See the overcapture section on the article.

  • Just pre-ordered!

    It says it will have a visible line when stitching under water footage.
    Requires two memory cards so I doubt will do in camera stitching.
    Will have a plugin for premiere and afx. PR doesn’t mention how it stitches.
    It will have over capture like the one.
    video is h.264
    protune video setting
    no audio line in.
    raw photo capture.

    • Congratulations Rich! I preordered one too.

      Yes the underwater stitching won’t be smooth. I guess you will need something like a 360bubble.

      It won’t have in-camera stitching, but the app can stitch videos (I don’t know at what resolution).

      Thanks again for the additional details!

      Best regards,
      Mic

  • im staying crazy with so many cameras coming out.. hahaha
    i already freezed because when i start to move for a cameras, there is another one coming hahaha..

    oh, i love it!! hope the price goes deep diving…

  • im staying crazy with so many cameras coming out.. hahaha
    i already freezed because when i start to move for a cameras, there is another one coming hahaha..

    oh, i love it!! hope the price goes deep diving ….

  • More questions:
    Manual exposure settings including white balance for video?
    Time-lapse? Intervals? In camera assembly of photos into two separate, non-stitched time-lapse videos.

    • It will have protune, but i don’t know all the protune options for the Fusion. I know for sure it has auto ISO limit and exposure compensation. Yes it has intervalometer.

  • DOA. There is nothing to special about this camera that sets it apart from others costing less and features missing that others incorporate standards, most notably in body stabilization. GoPro fell behind and will never recover.. from their action cameras surpassed now by everyone else, to their drones that are laughable, and now to this camera that is “meh” at best. Combines like Yi, Insta360 and Xiaomi eat the Fusion for breakfast for about half the price. I have nothing against GoPro and wish them the besy.. but these are just the facts.

    • Hi Paul. I can see where you’re coming from. The best case scenario is that it MIGHT combine the strongest features of its competitors:
      – the detail of the Yi 360 VR
      – dynamic range of the Yi 360 VR, Theta V and Xiaomi
      – stabilization of the Xiaomi, Virb 360, and Insta360 ONE –> confirmed
      – waterproofing and 360 sound of the Virb 360 –> confirmed
      – freecapture / overcapture of the Insta360 ONE –> confirmed
      – stitching of the Theta V –> seems confirmed
      All these features in one camera in the best case scenario, theoretically. We’ll have to see.

      Best regards,
      Mic

      • Have you received your GoPro yet Michael? I am keen to see a few full sized still images straight from camera and not embedded into a web viewer. On Google Drive or DropBox…

        • Hi Steve. Yes I got mine yesterday. i’m working on a comparison tonight. Spoiler alert: the photos are not as good as those of the Xiaomi.

          Best regards,
          Mic

  • […] One of the most startling specifications is the price: $399, currently scheduled to be available in October 2017.  That is less than some 4K cameras such as the Kodak PIXPRO Orbit 360 ($499), Nikon Keymission 360 ($499), and Ricoh Theta V ($429).  It is almost half the cost of the Garmin Virb 360 ($749) and costs substantially less than the GoPro Fusion ($699). […]

  • Hello Mic. Thanks for all the detailed info. There is something unclear for me.
    First you write : ” I don’t know however, if you can get a fully stitched live preview. It might be possible to preview one lens at a time.” then “Surprisingly, there is a fully stitched live view, although swiping the screen causes the preview to move in unexpected directions.”
    So I guess there is a live preview. Is it rectilinear ? Or is there, like the Xiaomi, the possibility to switch preview mode ? Little Planet ? Mirroball ?

    • Hi Paul. Yes there is a live preview, fully stitched. (Sorry I wrote the other part months before and I need to revise that.) The live preview is mirror ball view. You cannot switch to little planet, although you can swipe the screen to change the view to an overhead view.
      Best regards,
      Mic

    • Yes it can, based on time interval but not distance interval. Virb can do either time or distance interval.

      Best regards,
      Mic

  • Great review of the Fusion – after a couple weeks with one, I completely agree with your conclusion. It’s an awesome 360 action camera with some work to be done on the post workflow. I took one with me to India last week – was there shooting a documentary and wanted to experiment with some 360 BTS material. On my vintage 2013 MacBook Pro, the rendering took many days and crashed frequently, but the results are pretty solid. I’m impressed with the Fusion and look forward to updates to the workflow! https://youtu.be/PJHzjecv1gM

    • Thank you very much Matt and thanks for sharing your work. I am on a slow mobile connection right now but I will check it out later. Looks interesting so far! Best regards, Mic

      • Thanks Mic! I edited this in Final Cut Pro 10.4, which was an interesting experience. Apple added a pretty solid set of tools for working with and exporting 360 footage with 10.4, though there are definitely pretty obvious gaps at this early stage, notably no support for spatial audio or higher-than-4K 360 renders – so this might not be a fair example of the full Fusion experience. No problem at all ingesting, tweaking, and cutting the Fusion’s full-res CineForm files.

  • There are somewhere do download original “raw” files (photo and video) from Fusion camera? Not Youtube compressed ones.

    And second question: what bitrate videos have?

  • Halfway through the article there is a sub-heading Loop Recording…Then is says nothing about loop recording? Will it have the 5 min, 20 min and so on?

    • Hi Lee. Loop recording was a feature included in the beta. but in the release version, it doesn’t have loop recording. I’ve removed it from the article. Thank you very much.

      Best regards,
      Mic

  • Great review, thanks !
    Question: do you know when Fusion 2 will be released ? Or even rumors 🙂 (New features, improved features…)