Insta360 One RS special deal
360 Camera Techniques

How to take fully spherical 360 photos with DJI Mini 3 Pro (see sample photo)

DJI Mini 3 Pro can take almost fully spherical 360 photos
DJI Mini 3 Pro can take almost fully spherical 360 photos

The DJI Mini 3 Pro can take almost fully spherical 360 photos.  Here’s how.  UPDATE: a firmware update has enabled the Mini 3 Pro to take fully spherical 360 photos automatically.  See here.

Most DJI drones can take 360 photos (which DJI calls Sphere Panoramas) by taking photos at various angles and rotating.  However, when you look up at zenith of the 360 photo, you’ll see a gap.  That’s because the body of the drone blocks the camera’s view, which limits the camera’s maximum tilt.

Enter the DJI Mini 3 Pro (previewed here), the newest drone in DJI’s lineup.  The Mini 3 Pro has several capabilities, one of which is a higher maximum tilting angle thanks to a manta-like profile with a cutout above the camera.  The cutout enables the Mini 3 Pro to take portrait orientation photos and videos.  In addition, it also helps the DJI Mini 3 Pro take 360 photos without a gap in the zenith, except for a very small hole that is easy to patch:

The DJI Mini 3 Pro can take an almost fully spherical 360 photo with just a small hole in the zenith
The DJI Mini 3 Pro can take an almost fully spherical 360 photo with just a small hole in the zenith

The DJI Mini 3 Pro does have a built-in Sphere Panorama mode but it will not tilt the camera upward to the maximum angle.  Instead, to take an almost fully spherical 360 photo, you’ll need to tilt the camera and take shots manually for the upper part of the panorama.  You can then continue shooting the rest of the 360 photo using either the automatic Sphere Panorama or shooting the other photos manually.

You can check out this stunning 360 photo shot with this technique on the Mini 3 Pro by Christiaan Roest of Air View 360.  Although the process is not fully automatic, it can save postprocessing time and produce a more natural-looking sky.  Mini 3 Pro is available starting at $669:

Thanks for using these affiliate links at no additional cost to you so I can do more tests and reviews.

About the author

Mic Ty

5 Comments

Click here to post a comment

Leave a Reply to Fulvio Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

    • I would also like to know, but I believe 8, plus the 25 that most DJI drones capture, in sphere mode. (on the Mavic 2 PRO there are 26). That is 8 per line, in 3 lines (24) and one more from the azimuth.

  • Just tested pano functionality on Mini 3 Pro….
    It automatically generates an equirectangular pano which is 8192 pixels wide, which is a shame when you have a 48Mp sensor!
    There is no trace of the individual pictures used for the stitch, so that a stitch with external tools could be done.
    The Mini 2 was able to this and I could generate 12K pixel wide panos, with a lower resolution sensor and a less expensive drone!
    Of course one could take the individual photos that make up the pano, but you’d have to manually calculate every overlap, with a very high risk for errors! And, after all, why should one do that manually when the drone (which has a “Pro” qualification after all) could perfectly do it!
    If you read Christian Rooest’s article, more than 200 photos were manually taken for this pano: that’s simply absurd.
    Another quirk: when you shoot AEB photos, the generated files are 4096 pixels wide, definitely not 48 MP stuff!!
    DJI, what’s going on?