Drones Virtual Tour Cameras & Lenses

Flying DSLR: DJI Mavic 3 honest review for aerial 360 photos (full resolution samples)

Mavic 3 360 pano samples and review

With its Hasselblad camera, Micro Four Thirds size sensor and adjustable aperture, the Mavic 3 is almost like a flying DSLR or mirrorless camera.  How good is it for aerial 360 photos?  Here is an unsponsored and unbiased review from the perspective of a professional 360 photographer and licensed drone pilot, plus full resolution sample 360 panoramas.

The DJI Mavic 3 is DJI’s flagship drone for consumers with a 20mp Micro Four Thirds size sensor camera co-designed by Hasselblad that can capture 10-bit 5k video at up to 50fps.  It also has a secondary telephoto lens with an equivalent focal length of 162mm.  Starting at $2199, it is the most expensive Mavic model to date.  Is it really worth it or is it just hype?  I’ve been shooting 360 photos with it the past few weeks.  Here’s my perspective as a 360 virtual tour photographer and licensed drone pilot (I fly both photography drones and FPV drones).

Mavic 3 review for aerial 360 photos
Mavic 3 sample 360 photos and review

Specifications and Key Features

Main Camera
Sensor size (wide lens)4/3 inch
Photo resolution (wide lens)5280 x 3956 (20mp)
Video resolution5120 x 2700 at up to 50fps
Focal length (wide)24mm
Aperture (wide)f/2.8 to f/11
Secondary Camera
Sensor size (tele lens)1/2 inch
Photo resolution (tele lens)4000 x 3000 (12mp)
Video resolution (tele lens)3840 x 1920 30fps
Focal length (tele lens)162mm
Aperture (tele)f/4.4
Other info
ISO range100 to 6400
Shutter speed1/8000 to 8 secs (wide) or 2 secs (tele)
File formatVideo: mp4 or mov in H264 or H265; or Apple prores422 HQ (cine version only)
Photo: DNG or JPG
Memory storageBuilt-in (8GB for standard or 1TB for Cine)
Micro SD (up to 2TB)
Speed47mph (sport mode)
17.9mph ascent rate
13.4mph descent rate
Operating range9.3 Miles / 15 km
Flight time46 mins (flying)
40 mins (hovering)
Maximum payloadApprox. 560 grams
Battery5000 mAh 4S LiPo (15.4v)
Weight (with battery)11.8 oz / 335.5 g
Dimensions3.8 x 3.6 x 8.7" / 96.3 x 90.3 x 221.0 mm (Folded)
11.1 x 4.2 x 13.7" / 283.0 x 107.7 x 347.5 mm (Unfolded)
Price$2199 and up

Micro Four Thirds size sensor:  Slapping the Hasselblad brand on the Mavic 3’s camera isn’t very meaningful to me because at the end of the day, it’s not a medium format camera.  But what is impressive to me is that this is the first consumer drone to have Micro Four Thirds size sensor, which previously had been available only for professional drones costing at least $5,000.  All other factors being equal, a larger sensor has higher dynamic range, higher bit depth and better signal to noise ratio.   The Mavic 3’s sensor is almost twice the size of the 1-inch sensor in the Air 2S, and about 8x larger than a 1/2.3-inch sensor found in compact cameras and entry-level consumer drones.

5K video:  Mavic 3 can capture video at 5k resolution, up to 50 fps, in 10-bit log mode with a 200mbps bitrate.

Adjustable aperture: Mavic 3 is one of the first consumer drones to offer adjustable aperture, from f/2.8 to f/11.

46-Minute Flight time:  DJI claims that the Mavic 3 has a flight time of 40 minutes hovering or 46 minutes flight time.

360-degree obstacle avoidance:  Mavic 3 has sensors on all sides and can detect obstacles in all directions.

Mavic 3 has a Hasselblad camera with Micro Four Thirds size sensor and adjustable aperture
Mavic 3 has a Hasselblad camera with Micro Four Thirds size sensor and adjustable aperture

Ease of use; how to take a 360 panorama with the Mavic 3

With the most recent firmware update, the Mavic 3 can take 360 photos automatically.

  1. Choose photo mode.

  2. Tap on the photo mode icon to reveal the different photo modes.  Swipe up and choose Pano.  Please note that the Mavic 3 has to be in the air when you do this.  The app will not let you choose Pano before taking off.

3.  Tap on Sphere.  (Other panorama modes are also available, such as a 180-degree photo).

4.  Adjust the exposure if you wish then tap the shutter to begin shooting.

Mavic 3 will automatically take 25 photos (8 shots in 3 rows, plus 1 nadir shot) by shooting each column then rotating to the next position.

When shooting in Auto exposure, the Mavic 3 will set the exposure individually for every shot.  However, you can adjust exposure compensation +/- 3EV in 1/3 stop increments.  You can also choose aperture priority, shutter priority, ISO priority, by specifying the aperture, shutter speed and/or ISO, and leaving the other parameters to auto, or you can choose a fully manual exposure.

The Mavic 3 can take photos in either JPG or DNG Raw, however, the stitched photo will be in JPG.  DNG Raw photos will be unstitched and the 25 photos for each pano will be put in a separate folder for each panorama.  Each folder of 25 DNG photos takes up about 1 GB.  You can then edit and stitch the photos using third party software.

After shooting, the Mavic 3 will immediately begin stitching the photos.  The 360 photo can be viewed in the app, which will show you a low resolution tiny planet preview, with the option to download the stitched 360 photo in full resolution.

Resolution

The stitched resolution of the Mavic 3’s 360 photos depends on how you process them.  If you use the built-in 360 photo straight out of the camera, stitched by the Mavic 3’s software, then the resolution is 14,400 x 7,200 (104 megapixels).

If you shoot in Raw DNG, each unstitched DNG photo is 5280 x 3956.   If you then stitch the Raw DNG photos in PTGui, the stitched resolution is approximately 22500 x 11250 (250+ megapixels).

Field of view and coverage

The Mavic 3 can only tilt its camera upward 35 degrees, so it cannot take fully spherical 360 photos.  The actual coverage is approximately 270 degrees (i.e., a 90-degree hole in the zenith).  When the Mavic 3 stitches the 360 photo, it fills the hole in the zenith automatically by blurring it.

“Built-in ND filter”

The Mavic 3 does not have a built-in ND filter but its aperture can be adjusted down to f/11, 4 stops narrower than the f/2.8 wide open aperture.  This enables me to underexpose shots even in bright sunlight and even without an ND filter.

Speed

One of the strengths of the Mavic 3 for aerial 360 photos is the speed with which it can take an aerial pano.  The Mavic 3 can shoot a 360 photo in about 1 minute 8 seconds.  Of that, about 30 seconds are for processing the 360 photo, so the shooting is as fast as under 40 seconds.

Operating Range

One thing I appreciated with the Mavic 3 is that it is able to maintain a strong radio signal even with a lot of radio interference nearby.  With my consumer drones such as the Parrot Anafi or Mavic Air, I get low signal warnings as low as 150 ft in the air in the same area.

Power and stability

The Mavic 3 has very large 9.5-inch propellers, which enables it to maintain its position even against 20mph winds (DJI claims that it can fly in winds as strong as 26.5mph).  This stability is very helpful for smooth stitching of 360 aerial photos.

Image quality; Mavic 3 sample 360 photos

Here are a couple of sample 360 photos from the Mavic 3, straight out of the camera, stitched by the built-in software of the Mavic 3 (click on the thumbnail to select the photo).

For the sunset shot, the exposure was spot on.  The Mavic 3 chose an exposure that avoided any blown highlights and captured the sunset in all its colors.  However, in the daylight shot, the exposure is a little more aggressive than I expected.  The backlit cirrus clouds are obviously going to be extremely bright no matter what, but I nonetheless expected it to choose a more conservative exposure with fewer blown highlights.

That leads me to a related criticism, which is that I wish it had bracketing for 360 photos, which could have greatly increased the dynamic range.  I also wish there had been an option to take 360 photos automatically with the telephoto lens for greater detail.

In terms of stitching, the Mavic’s built-in stitching is very convenient but isn’t perfect.  You can sometimes see stitching errors, such as these:

360 photos stitched automatically by the Mavic 3 may have stitching errors
360 photos stitched automatically by the Mavic 3 may have stitching errors

However, please note that I took this shot at a very low altitude, close to the amphitheater, which has many lines, so this is pretty much the worst-case scenario for stitching with the Mavic 3.  For aerial 360 photos, at more typical altitudes, the stitching will generally look seamless, as in the sunset shot above.

In any case, here is the edited version of another contemporaneous daylight shot, stitched from DNG:

This version stitched from DNG photos shows far better detail and dynamic range and really shows the true potential of the Mavic 3.  The sky also has a much more realistic hue.  Note: I uploaded this to Street View, which has a maximum resolution of 100 megapixels therefore I had to downscale the photo.  The full resolution is 250+ mp (see full resolution version here), which is similar to the resolution I get when I use a high resolution mirrorless camera for a 360 pano.

When I posted this shot on Facebook, many drone pilots asked me how I patched the hole in the zenith.  A popular technique for doing that is to use Photoshop’s content aware fill or similar cloning techniques.  However, to get the best and most professional results, I prefer to use the actual sky, particularly when it is as stunning as this one was on that day.  I’m working on a tutorial and will post it when it becomes available.  If you want to be notified, just comment below and turn on notifications, or subscribe to my YouTube channel.

Here is another sample, after I got a better idea of how the Mavic 3 chooses its exposure.  Note: the sunstar is real (so is the rainbow) and it’s one of the things I like about the Mavic 3:

Filling the hole in the nadir

You can fill the hole in the nadir in many ways including generative fill.  Here’s a demo.

Conclusion

Yes, the Mavic 3 is significantly more expensive than other Mavic models.  Nonetheless, it takes excellent quality 360 photos with dynamic range and bit depth that are somewhat comparable to a DSLR or mirrorless camera when shot in DNG.  Considering that the photo quality is comparable to a mirrorless camera, and that it can take photos automatically like a motorized panoramic head, the Mavic 3’s price is quite reasonable in my opinion.  If you want to add high quality aerial 360 photos to your virtual tours, the Mavic 3 is an excellent option.  However, if the Mavic 3 is outside of your budget, you can also check out the Mavic Air 2S ($999 at Amazon or B&H Photo), which offers similar level of detail (but not dynamic range), compared here.

How to get a discount

The Mavic 3 is available starting at $2199 on Amazon.  But you can get a discount when you buy the Mavic 3 from B&H Photo, because they immediately refund your sales tax when you purchase with their Payboo card.  It’s not a mail-in rebate.  Rather, the sales tax is immediately credited back to your account so you won’t have to pay a sales tax, which can be a significant savings, depending on where you are.  Thank you for using these affiliate links at no cost to you so I can do more tests and reviews.

About the author

Mic Ty

22 Comments

Click here to post a comment

Leave a Reply to neil james henderson Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

  • I use the 360 pano function for commercial work, previously using the Mavic2Pro. So far I have found that the Mavic 3 has a couple of advantages, and one major disadvantage ( which I hope they will resolve in firmware). The 1st improvement over the M2P Is the significant higher quality of the stitched image. This has a far greater resolution and is more than sufficient for a number of my jobs without the need to having to stick the RAW files. HOWEVER, the stitching so far has not been anywhere nearly as good at the M2P and has made some images unusable. This has also been the case for the 3×3 wide pano. Another advantage of the Mavic 3 is that the lens can look up higher than the M2. The Pano mode doesn’t make full use of this, but I have tested by taking an extra 6 images at the highest elevation. This means less sky to replace. I do use the PS content aware fill method but it is not always perfect so would be interested in hearing about your method Ty.

  • I did a test of 360 panorama manually in AEB (5) with dng photos and the result was very good (Mavic 3), with little margin of error in the montage program. I noticed that I got more sky material, because in the first takes (08) I raised the gimbal to + 35º. So there was little space to fill in the sky, which made it possible for a very good complement by the PSP. I tested the same 360 ​​panorama, but in DJI Flay’s auto mode, I was amazed at the capture speed (almost 1 frame per second) and the exposure wasn’t too bad. When stitching the dng images saved in automatic mode, I was pleasantly surprised that the montage software gave an error as low as 0.01%. However, I noticed that in automatic mode, the gimbal does not capture at +35º, and later makes it difficult to complement the sky by the PSP, as there is a much larger blank space! I’m thinking of doing the following: Producing the panorama automatically by DJI FLY and then raising the gimbal to + 35º and shooting the 08 photos to capture more of the sky, then I would have a total of 25 of the automatic panorama + 8 of manual shooting . I think it would facilitate the later addition of sky on the PSP. What do you think?

    • To Eduardo and Brian: is there any logical reasons why DJI might not move the camera fully in the current version? Is it just to decrease the time of capturing the panoramic image or some other reason?

      I’ve been working in the civil drone sector for five years and I have a contact at DJI that I can forward this to. Also, if there is anything else regarding the 360 panorama mode we would like to request, I can give it a try.

      • Thanks! But I cannot save it to disk from there or is there an option to do so? The reason I am asking is that I like to pixel peep on the image on my PC in the (presumably) original equirectangular format in which it comes out. Also I am working on a VR180 / VR360 software and would be interested in loading your image in that app.

        • Hi Daniel. You can zoom in the photo. If I made it downloadable then people would just use it for themselves. As it is, people are already copying my articles and claiming it as their own, which is already bad enough.

          • Oh, sorry to hear that. It’s okay then. The zooming works good over the link you shared. Do you know at which exposure time the individual shots were taken in that image?

          • Hi Daniel. I used Auto so the shutter speed varies from shot to shot. The shutter was as slow as 1/640 and as fast as 1/6400. Aperture was f/2.8 and ISO 100 for all of them.

  • Great review but can you answer 3 questions:
    – How does final output compare to air 2S when processing raw (is it worthy upgrade as air 2s takes 27 shots) ?
    – is nadir size similar to air 2s
    – have you tried shooting manual hdr?

  • Great article. Quick question regarding the pano viewer. How did you create the ability to click on the arrows within the viewer to jump to the next scene? I create panos for a client of mine but they currently have to navigate a menu to jump between the different pano views. Yours is very seamless and a nice touch.

    Thank you!

    -Matt

  • hello, gratulation to the great panoramas. Wich maximum pitch angel (up) use the mavic air 3 in pano mode? Did you shoot manually pitch up to gimbal the maximum? I must do so with my air 2.
    sincerely gerudf