Here is a comparison between three panoramic heads for GoPro Hero 5, Hero 6 and Hero 7: the Pano5+1 mk II, the Panohero H5B, and the iGo 720 VR. With these panoramic heads and a compatible GoPro, you’ll be able to take very high resolution (around 66mp) fully spherical 360 photos, with detail comparable to low-end DSLR panoramic photos, for under $500.
I compared the three panoramic heads by shooting photos with them with a GoPro Hero6. I then stitched the photos in PTGui. Here are the results.
Pano 5+1 mk II (reviewed here) is a panoramic head for Hero5, Hero6, or Hero7. It also includes an adapter for Hero4. Here is a tutorial:
Here is a quick tutorial:
Here is a sample photo with the Pano5+1:
With respect to stitching quality, here is an analysis from PTGui showing ‘very good’ stitching:
Pano 5+1 mk II is a panoramic head for Hero5, Hero6, or Hero7. Here is a tutorial with an older model for Yi action cameras (Panohero H5B is very similar except you take 4 shots above and 4 shots below, i.e. 8 shots instead of 6 shots). Panohero H5B also has better stitching due to greater overlap compared to the older 6-shot Panohero.
Here is an updated tutorial:
Here is a sample photo with the Panohero H5B:
With respect to stitching quality, here is an analysis from PTGui showing ‘very good’ stitching (with a bit lower control point distances than the Pano 5+1 mk II):
iGo 720 VR
iGo 720 VR is a panoramic head for Hero5, Hero6, or Hero7. It also includes an adapter for Hero4. To take a photo with the iGo 720 vR, you’ll need to take 12 shots (6 shots above and 6 shots below). Here is a tutorial by its distributor Stabilizer Pro:
Here is a sample photo:
Here is an analysis of its stitching quality:
Panohero H5B and Pano 5+1 mk II both have ‘very good’ stitching (Panohero’s stitching is slightly better than Pano 5+1). iGo 720 VR’s stitching is “good.” Because they have better stitching and because they require fewer shots, I would suggest Panohero or Pano 5+1. Between Panohero and Pano 5+1, Panohero is a bit easier to shoot with in my opinion, because you only need one panoramic head. However, the stitch lines are diagonal, which makes it harder to avoid the stitch line (it’s difficult to aim it in such a way that important objects will not have a stitch line). With Pano5+1, the angles are orthogonal, so avoiding the stitch line is easier.
Where to buy:
Thanks for supporting 360 Rumors at no additional cost to you by using these affiliate links:
GoPro Hero 7 Black
GoPro Hero 6 Black
GoPro Hero 5 Black (commercial packaging)
Pano5+1 Mk II
Panohero H5B (not an affiliate link)
iGo 720 VR (not an affiliate link)